Connect with us
maintaining your boiler is important for the planet and your health maintaining your boiler is important for the planet and your health

Features

Boiler Maintenance is Vital for the Environment and Your Health

Shutterstock Photo License - Studio Harmony

Published

on

There are a lot of important things that you have to take into consideration when you are trying to be an eco-friendly consumer. You probably already appreciate the need to invest in renewable energy if you want to lower your carbon footprint.

However, some lifestyle decisions we make may have environmental consequences that we haven’t thought about. Your heating system can have a terrible impact on our carbon footprint. You may be surprised to hear that your heat accounts for around 40% of all energy-related carbon dioxide emissions.

You might not have thought much about the importance of taking care of your boilers. Wired UK has talked about the scary environmental impact they have. Green Journal has talked about the importance of keeping your boilers functioning properly to protect the planet.

Why is it important to keep your boiler running smoothly if you want to protect the planet? When they aren’t running well, they product more carbon monoxide. This is obviously dangerous for your health. It is also terrible for the planet.

Keep Your Boiler Running Well to Protect Your Health and the Planet

If your boiler gaining pressure consistently more often, then you may have to add some repairs to your to-do list, as this symptom means that there’s something wrong with your boiler. In this ultimate guide on boiler pressure, we’ll talk about what causes it and tips to keep in mind so that your boiler doesn’t lose pressure any time soon.  This is going to be very important if you want to make sure the boiler runs properly to protect your health and the planet.

Top Reasons Of Pressure Rising In Boiler

  1. Pressure in the filling loop
  2. Faulty Pressure Gauge 
  3. Build up of Grime/Sludge in the system 

You want to address any of these problems so the boiler doesn’t fail and end up releasing carbon monoxide that can poison your family and the environment. This is important even if you have invested in a green boiler, since they can still create some harmful environmental consequences when they aren’t managed properly.

The Filling Loop

One method to bring the pressure down, is to release the pressure through the filling loop. This will help if your boiler pressure is high when the heating is on, or if the pressure has been slowly increasing.

You can also try to get the pressure down by topping up the pressure on your boiler. If your boiler is losing pressure slowly, this may help. Finally, if you have a combi boiler, you may be able to increase the boiler pressure by turning it up.

Faulty Pressure Gauge

One of the most common reasons for a boiler’s pressure to keep increasing is a faulty pressure gauge. If your boiler’s pressure gauge is inaccurate, it could be reading the wrong pressure and causing the boiler to build up too much pressure.

You can release the pressure from your boiler by bleeding the radiators. To do this, turn off the power to your boiler, then find the bleed valve on one of the radiators and open it until water starts flowing out. 

Once the water starts flowing, close the valve and turn the power back on to your boiler. If you have a combi boiler, you may need to top up the pressure in order to get the heating and hot water working properly again.

Build-Up Of Grime/Sludge In The System

Over time, the build-up of grime in your boiler’s system can cause the pressure to rise. This is because the grime prevents water from circulating properly, causing the boiler to work harder to heat the water. 

If you notice that your boiler’s pressure is rising, it’s important to clean the system out as soon as possible. Otherwise, the boiler could overheat and become a serious fire hazard. To clean the system, start by draining all of the water from the boiler. Then, use a brush or other tool to remove any grime from the inside of the boiler. Finally, refill the boiler with fresh water and add a cleaning solution designed for boilers.

FAQ

Where Is The Filling Loop On My Boiler?

Pressure rising on boiler can be a nuisance to deal with and if your boiler pressure keeps rising, it could be due to a few different things. One possibility is that the filling loop is turned on. The filling loop is used to add water to the boiler and should only be turned on when the boiler needs to be refilled. If the filling loop is left on, it can cause the boiler pressure to rise. Another possibility is that there is a leak in the system. 

A leak can cause the water level in the boiler to drop, which will cause the pressure to increase. If you think there might be a leak, check for signs of water around the base of the boiler or in the overflow pipe. Finally, if your boiler has been turned off for a while, it may need to be bled before it will work properly.

How To Top Up Pressure On Boiler

If the pressure in your boiler is too high, it can be dangerous and cause your boiler to stop working. If you have a combi boiler, the pressure should be between 1 and 2 bar. If it’s a roller pressure, it should be between 0.5 and 1 bar. If the pressure in your boiler is higher than this, you’ll need to top up the pressure.

There are two ways of doing this: one is by adding more water which will bring down the level of steam in the boiler and therefore reduce its pressure; another way is by turning off your heating for an hour or so, which will reduce the demand for heat.

The easiest way to tell if you’re using too much water to decrease your pressure, though, is when your hot water supply becomes cold while bathing or washing dishes.

Is Low Boiler Pressure Dangerous?

Low boiler pressure is not dangerous but if the pressure gets too high, it can be a sign of a serious problem. If you notice that your boiler’s pressure is increasing, you should check the gauge to see if it is reading correctly.

If the gauge is reading correctly, then you should check the safety valve to see if it needs to be released. If the safety valve needs to be released, you should do so slowly and carefully. If you are not comfortable doing this, you should call a professional.

Does the issue lead to environmental problems?

Your boiler system could start having a harmful impact on the planet if you don’t fix it when the pressure is too low. The system could start to fail and then it will produce more gases that will harm the planet. It will also operate less efficiently, which means it will need to consume more fuel and produce more emissions to produce the same amount of heat.

Take Care of Your Boiler to Keep it from Damaging the Planet and Your Health

Pressure too high a on boiler can be frustrating if you don’t know what to look for. Calling a professional for assistance is always recommended in cases where you’re not sure how to proceed with boiler high pressure. This is important for protecting your health and the environment.

Daniela McVicker is a professional writer and editor for various websites. As someone with a strong love for taking care of the environment, she truly enjoys providing the younger generations with easy yet efficient tips for preventing global warming and living a more sustainable life.

Advertisement

Like our Facebook Page

Advertisement

Trending